One of The Best Standalone Cable Tower for Your Home Gym?
GetRXd Phoenix Functional Trainer
200 lb weight stack. Tornado Arms that rotate 180 degrees. 8-foot ceiling minimum. If you've been searching for a dedicated cable tower built for serious home gym training, this is worth a look.
Check Price at GetRXd →Why a Dedicated Cable Tower?
If you've been following along, you know I've spent a lot of time looking at all-in-one systems -- racks with built-in functional trainers, smart mirrors with cable attachments, and everything in between. And those are great. But there's a specific buyer out there who already has a power rack, already has their barbell setup dialed in, and just needs a serious cable station to round everything out.
That's exactly who the GetRXd Phoenix is built for. This is a standalone functional trainer, not a rack combo. It's a dedicated cable tower -- two weight stacks, 200 lbs of resistance, and a pulley system designed specifically for cable work. If that's what you're after, keep reading.
The Tornado Arms Are the Real Story Here
The standout feature on the Phoenix isn't the weight stack -- it's the Tornado Arms. These dual cable arms rotate 180 degrees and give you 7 vertical and 7 horizontal positions to work with. That level of adjustability is a big deal if you do a lot of cable work, because the angle of your pull changes the feel of every exercise.
Chest flies, cable rows, face pulls, reverse flyes -- every one of these can be dialed in to the exact angle you want. Overhead, neutral, low anchor, wherever you need it. Compare that to a lot of cheaper cable towers where you've got maybe five positions total and you're doing geometry with your stance to hit the right angle. The Tornado Arms solve that problem.
200 Lbs of Stack, 1:1 and 2:1 Ratios
The Phoenix runs a 200 lb weight stack with two pulley ratio options: 1:1 on dual arm work and 2:1 on single arm. The trolley range goes from 4 inches off the floor all the way up to 90 inches -- which covers everything from low-ankle work to overhead pulley pulls.
Cable travel is 97 inches on single arm and 48 inches on dual. The cables themselves are aircraft-grade nylon running through aluminum pulleys. That combination keeps the movement smooth without the squeak and drag you get on cheaper systems.
One thing worth calling out: the Phoenix requires a minimum 8-foot ceiling to function properly. If your garage or basement is tighter than that, this isn't the right setup for you. Measure first. Non-negotiable.
Shop the Phoenix + Accessories
The Phoenix ships free in the continental US. If you want the lat attachment, grab that at checkout too.
Shop GetRXd →Build Quality: 3x3 Steel, Chrome Uprights, 11-Gauge
The frame is 3x3-inch 11-gauge steel with chrome uprights. One-inch holes with 2-inch spacing for your attachment points. This is a solidly built machine -- not featherweight, not going to shift on you mid-set. If you've handled other quality cable towers in this price range, you'll recognize that GetRXd isn't cutting corners on the structural side.
You also get two optional upgrades worth knowing about: the Counterbalance add-on makes the arm feel 57% lighter when you're repositioning it between sets, which matters when you're moving through a circuit and adjusting angles constantly. The Flat Stabilizer is the other add-on -- useful if your floor situation means you need extra anchoring stability.
Who Is This For?
The Phoenix makes sense for a pretty specific buyer. If you want a standalone cable tower that doesn't require a matching rack and gives you serious adjustability and a solid weight stack at around $2,000 with free shipping, this is one of the cleaner options I've come across.
It's not an all-in-one. There's no built-in bench, no barbell rack, no pull-up bar. It's a functional trainer and that's it -- which is exactly the point. For someone who already has a rack setup and wants to add dedicated cable work, or someone building a space where a standalone tower makes more sense than a combo unit, the Phoenix fits.
If you're starting from zero and want one machine to do everything, you might be better off looking at a full rack-trainer combo. But if cables are where you spend most of your time and you want the tool built specifically for that work, this is worth your attention.
GetRXd Phoenix Specs
| Spec | GetRXd Phoenix Functional Trainer |
|---|---|
| Weight Stack | 200 lbs |
| Pulley Ratio | 1:1 dual / 2:1 single arm |
| Tornado Arms | Dual, rotate 180°, 7 vertical + 7 horizontal positions |
| Trolley Range | 4" to 90" |
| Cable Travel | 97" single / 48" dual |
| Steel | 3x3" 11-gauge, chrome uprights, 1" holes / 2" spacing |
| Cables | Aircraft-grade nylon |
| Pulleys | Aluminum |
| Ceiling Requirement | 8 ft minimum |
| Price | ~$2,000 + free shipping |
| Optional Upgrades | Counterbalance (57% lighter arm feel), Flat Stabilizer |
Ready to Pull the Trigger?
Use my affiliate link to shop the Phoenix and support the channel. Free shipping in the continental US and one of the best cable towers I've gotten my hands on at this price point.
Shop the Phoenix at GetRXd →Bottom Line
The GetRXd Phoenix is a dedicated cable tower done right. Tornado Arms, solid steel construction, a usable weight stack, and adjustability that keeps up with how you actually train. At around two grand with free shipping, it sits in a reasonable range for what you're getting.
If you already have a rack and you're looking to add a cable station that won't feel like a compromise, the Phoenix is worth a serious look. Use the link below to check current pricing and availability -- and if you pick one up, let me know what you think in the comments.
